Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Federal Way?
Spring replacement in Federal Way typically costs $180-$340 for a single torsion spring, including the new spring and the labor to install it safely. Because most doors run a matched pair of springs that wear at the same rate, replacing both together usually lands around $360-$680. Those are typical estimates for our Federal Way market in 2026, and the written estimate you get before any work starts sets the final price.
We handle spring replacement as a specialty, not a sideline. Garage doors are all we do, and spring repair is one of the most commonly mishandled jobs in the trade because the parts sit under heavy tension. If your door came down hard or you heard a loud snap from the garage, call (877) 792-6864. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key takeaways:
- One torsion spring: typically $180-$340. A matched pair: about $360-$680.
- A failing spring usually announces itself with a bang, then a door that won’t lift or won’t stay up.
- Replacing springs in pairs is standard practice because the second spring is already near the end of its life.
- Estimates are free, and the written estimate sets the price.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical residential job in Federal Way. Each line is an estimate for the work described, and the final price depends on the specific door and springs on your garage.
| Item | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $180-$340 |
| Matched pair of torsion springs | about $360-$680 |
| Spring plus cable replacement (when cables are frayed or off the drum) | $130-$250 for the cables |
| Spring plus roller replacement (worn rollers often show up at the same tune-up) | $110-$220 for the rollers |
| Track realignment if the door jumped or shifted when the spring failed | $120-$240 |
| Opener repair if the motor was strained by a heavy door | $120-$320 |
| Full garage door repair (mixed issues on one visit) | $150-$600 |
A single broken spring is the most common call we get. Standard-height residential doors in Federal Way’s housing stock usually carry one or two torsion springs above the door, mounted on a steel shaft. A two-car door with a pair will lose one spring first, and the door will still open partway, then stop or hang crooked. That’s the point where homeowners call. We quote the spring replacement, and on the same visit we check the cables, drums, and rollers, because a spring failure often puts extra strain on those parts. Any additional work gets its own line on the estimate so you can see exactly what’s included.
What pushes a job toward the higher end of the range: heavier insulated doors, high-lift or unusual track setups, springs that require a specific wire size, and any secondary damage from a door that came down while the spring was broken. What keeps it near the low end: a standard single spring on a lighter door with everything else in good shape.
What Affects Spring Replacement Pricing in Federal Way
- One spring or two. A matched pair costs about twice a single spring. We recommend replacing both springs at the same time because the second one has seen the same cycles and is usually close behind the first. Doing them together saves you a second visit and a second bill.
- Spring type and size. Torsion springs come in different wire gauges and lengths sized to the weight of the door. A heavy insulated door needs heavier springs, which costs a bit more than the springs on a basic single-car door.
- Door weight and construction. Federal Way has a lot of homes built across several decades, and door weights vary widely. A well-insulated double door requires more spring tension than a lightweight uninsulated one, and the parts reflect that.
- Secondary damage. When a spring lets go, the door drops and can bend a track, pop a cable off its drum, or strain the opener. Any of those add a line or two to the estimate. Catching a broken spring early usually keeps the job to springs alone.
- Local weather and garage use. The Puget Sound region’s damp climate and the temperature swings across a Federal Way year work on steel springs the same way they work on anything metal: cycles of moisture and drying. Springs fail on cycle count, not on a calendar, but a door that runs several times a day in a busy household gets there faster.
- Access and door condition. A cleared garage bay and a door in otherwise sound condition make the job straightforward. A door that’s been binding or off-balance for a while may need adjustment work along with the springs.
You can read more about how we handle the job on our spring replacement page, and if you’re not sure whether it’s the spring or something else, start with garage door repair Federal Way pros to get matched with the right service.
How to Save on Spring Replacement
The most reliable way to keep a spring replacement near the lower end of the range is to call when you hear the first pop, not after the door has been forced open a few times. Springs are sized to carry the door’s weight; running a heavy door on a broken spring strains the opener, cables, and rollers and turns a one-part job into a three-part job.
- Replace both springs when one breaks. It feels like spending more, but it’s cheaper than two separate visits, and the second spring is already at the end of its cycle life.
- Ask for the door balance checked on the same visit. A quick adjustment while the technician is already there costs far less than a separate appointment.
- Keep the door hardware lightly lubricated. Rollers, hinges, and the spring coils benefit from periodic lubrication, which reduces wear and keeps the door running smoothly between spring replacements.
- Get the free estimate in writing before work starts. That way the number you agree to is the number on the invoice, and you can see whether cables, rollers, or a track adjustment need to be added now or can wait.
- Don’t force a broken door. Every time you run the opener against a broken spring, the motor and cables take damage that shows up on the next estimate.
Estimates are free. Call (877) 792-6864 and we’ll walk you through what your door likely needs and the typical range for it.
Can You Replace a Spring the Same Day?
Yes. Same-day spring replacement is usually possible when you call early, and we don’t treat a broken spring as a maybe-later job. Spring replacement is one of our three focused service lines, alongside general garage door repair and opener repair, so it’s a core part of what our technicians do every week rather than an add-on squeezed between other trades. That single-trade focus means garage door calls get scheduled as garage door calls.
Our technicians have up to 13 years of experience, and they’re trained on the brands homeowners here actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That cross-brand fluency matters for springs more than people expect. Spring sizing depends on the door’s weight and hardware, and knowing how Clopay, Amarr, or Wayne Dalton doors are built helps us bring the right springs on the first visit. Call (877) 792-6864. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Spring Repair Is a Job for a Specialist
A torsion spring stores an enormous amount of energy when the door is down, and that energy releases the moment the spring is worked on incorrectly. This is why spring replacement is one of the most dangerous repairs in the trade. Our position is simple: technicians who do spring work routinely are the right people for it, and homeowners should not attempt to release, wind, or remove a torsion spring themselves. The tools alone (winding bars sized to the spring) are specialized, and a slip can cause serious injury. If your door won’t open, leave it down and call.
Alongside the safety side of things, there’s a quality side. A spring that’s the wrong wire gauge for the door will fail early or leave the door out of balance. A door balanced correctly lifts with one hand halfway up and stays put. If yours feels heavy, drifts down, or slams shut, the spring tension was set wrong or the door is out of balance. We check the balance after every spring replacement so the door runs as it should.
Our scope is limited on purpose: garage door repair, opener repair, and spring repair. That’s it. If your opener is also strained from a heavy door, we can handle that on the same visit, and for a tired opener we can talk through options. Opener replacement, when it comes up, typically runs $250-$550 for installation, and new door installation runs $700-$2200, but we’ll always tell you if a repair solves the problem for less.
How Long Do Garage Door Springs Last in Federal Way?
Torsion springs are rated by cycle count (one open plus one close is one cycle), not by years. A standard spring is often rated for a set number of cycles, and a busy household running the door four or more times a day uses them up faster than a garage that opens once in the morning and once at night. The practical effect is that a door in daily use in Federal Way can expect to need springs long before the door itself is worn out.
Signs a spring is on the way out: a loud bang from the garage, a door that opens a few inches and stops, a gap between the coils of the torsion spring above the door, or a door that feels suddenly heavy. Any of those mean it’s time for a look. Catching it early usually keeps the job to spring replacement plus a few checks, which is the least expensive version of the repair.
Spring Replacement vs. a New Door
In most cases, replacing springs is the right call. If the door, panels, tracks, and opener are in decent shape, new springs restore the door to working order for a fraction of the cost of a new door. A new door runs $700-$2200 depending on size, material, and insulation, compared with $180-$340 for a single spring. If the door is bent, rusted through, or the sections are separating, it may be worth pricing a full replacement, and panel replacement runs $250-$500 when only one section is damaged. We’ll tell you honestly which makes sense for your door.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Federal Way?
Spring replacement in Federal Way typically runs $180-$340 for a single torsion spring, and about $360-$680 for a matched pair, which is the usual replacement. The written estimate sets the final price. Call (877) 792-6864 for a free estimate; we answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to replace one spring or both?
Replacing one spring costs less up front, but replacing both together is usually cheaper overall. A pair runs about $360-$680, while replacing one now and the second a few months later means two visits and two labor charges. The second spring is nearly always close to failing. Call (877) 792-6864 and we’ll give you the pair price and the single-spring price so you can compare.
Do I need to replace the cables when I replace the springs?
Cables are only replaced if they’re damaged, and cable repair is typically $130-$250. A spring failure can fray a cable or knock it off its drum, so we check them while we’re in there. If they’re sound, we leave them. Call (877) 792-6864 for a free estimate that covers the springs and any cable work your door needs.
Can you replace a broken spring the same day in Federal Way?
Same-day spring replacement is usually possible, and spring repair is one of only three service lines we do, so it gets scheduled as a priority. Call (877) 792-6864. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the estimate is free.
Is spring replacement something I can do myself?
No. Torsion springs store enough energy to cause serious injury if released or wound incorrectly, and the right tools (winding bars and proper technique) are not something most homeowners have. A spring job done wrong also leaves the door out of balance, which damages the opener and cables. Leave it to a trained technician. Call (877) 792-6864 for a free estimate and we’ll handle it safely.
Get Your Spring Replacement Estimate
If your Federal Way garage door has a broken spring, the fastest path back to a working door is a call. We only do garage doors, so a spring call gets a technician who works on them daily. Our technicians have up to 13 years of experience and are trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so your door and opener get handled by someone who knows the equipment. Estimates are free. Call (877) 792-6864. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Federal Way market as of 2026. Garage Door Repair Federal Way Pros offers free estimates – call (877) 792-6864.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Eric Anderson"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Divya Sharma"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Bethany Hoffman